How to Programming a Subaru Key Fob at Home

Depending on how new subaru key your Subaru is, you may require having the key fob programmed by an auto locksmith. This is accomplished by connecting a computer programming machine to your car.

To program your Subaru begin by opening the driver's doors using the door button control, and then close it. You will hear the chime, and see the dome lights flash in the instrument panel.

Step 1: Locate your transmitter circuit board

There are a variety of ways to program your key fob. First, you should be aware of the type of key fob you own. This can be done by looking at the shape of the key fob or by listening to the buzz in your car.

Once you have the information you require, you can begin the process of programming your key fob from home. You'll require an flathead and a steel key to do this. You can open the key fob by twisting. The key is inserted into the case and release the battery by pushing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2: Unscrew the Key Fob Case

It is a good idea to replace the battery in key fobs if they're not working. In some instances, the buttons on the key fob can be damaged. If you can see that the buttons' contacts made of metal have become loose, you can try applying solder back to them to ensure that they function properly.

Before you start the process, ensure that the doors of your car are shut and the ignition is turned off. You can do this by closing the driver's door and pressing the door button ten times in quick succession. After that, you'll hear the instrument panel chime and the dome lights will light up. This indicates you're now ready to move on.

Step 3: Insert the Key Fob in the Ignition

There are numerous articles online that will give instructions on how to program a replacement or new subaru key locked in car key fob at home, but most of them are not particularly specific. Programming an electronic key is best handled by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your subaru keys made with the engine turned off and the doors shut. Use the door button to unlock all of the doors. Open and close the driver's door twice more. After that, insert and remove your key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp to confirm that the settings have been altered.

Step 4: Turn the Ignition On

It is important to know that this method of programming a key fob works if you already have a working key. If not an auto-locksmith or a dealer will be required to program keys for your Subaru Fort Bliss.

Once the key is programmed, it will be in a position to start your vehicle in about 5 minutes. Begin by closing all doors and turning off the engine. Sit in the driver's seat and open all doors using the door button. Put the key in the ignition and turn it off to the first position (the electrical systems will turn on, but the engine is off), and then back to the off position ten times in quick succession.

Step 5: Unlock the Driver's Door

Subaru offers a wide range of high-end cars with key fobs, which can lock and unlock the doors as well as start the car and defrost the windows. However, sometimes, these devices aren't working as they should.

Contact a locksmith or a dealer to solve the issue. This will resolve the issue and ensure that your vehicle is secure.

To do this, open the door to the driver's side and close it. Place the key into the ignition and then turn it to position 1. Then, you can turn it back to the off position. Repeat this 10 times in one row as fast as you can. After the tenth repetition, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock button on the driver's Door

The procedure to replace the battery inside a Subaru remote key fob is a breeze. Open the exterior fob case. Then make use of the flathead screwdriver open the inside of the case and take out the old battery.

After removing the battery, put in the new one and close the case. Then, sit in the driver's seat and unlock all doors by using the door button control. After that, put the key in the ignition and turn it to ensure that the electrical systems are powered on but the engine is off. Repeat this ten times in a row until you hear the chime on the instrument panel. This will enter the system into programming mode.

Step 7: Press the Lock/Unlock Button on the Passenger's Door

For some owners, the annoying sound that is heard when locking and unlocking the Subaru key fob from outside the vehicle could be distracting. In some instances the chirp can be turned off by opening and closing the doors as well as a double-click of the lock button on the key fob.

Close all doors including the lid that holds the fuel, and turn off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime after this is accomplished. The chirp signalizes that the lid for the fuel-filler and door are locked. It is possible to change the setting to make the doors lock automatically and without pressing a button.

Step 8 Step 8: Enter your Transmitter's 8-digit Number

Write down the first series of 8 digits and keep it handy. Once you're in the driver's seat, close the doors and turn the ignition to the first position. After 10 turns, your panel should chime once.

Next, open the key fob case and locate the circuit board of the transmitter inside. The circuit board should have one or two numbers with 8 digits. Take note of the first sequence of numbers, and follow the instructions in this guide to register the code in the system of your vehicle. This may require visiting the dealer for older models.