UPVC Door Handles Replacement Guide

Replacing door handle lock repair handles made of upvc is an easy DIY task once you have the proper measurements. These measurements include the distance between the handle's backplate fixing centres (sometimes called PZ) and the centre of the key hole.

The most common uPVC handle is two inline levers. One inside and one external, joined by a spindle. They are used to operate the multi-point lock found in uPVC as well as aluminium and wooden doors.

Brands & finishes

A broken uPVC handle can be much more than just a minor inconvenience. It could also make your home vulnerable to burglars who could force the lock open and gain entry to your home. This is the reason it's essential to recognise when your uPVC door handles are beginning to break down and act as soon as possible.

Fortunately, changing your uPVC handles for your front door is a relatively simple task that only requires a few tools and some precise measurements. In the majority of cases, you'll simply screw in the new uPVC handle and you're ready to go. But, it's best to look for the top quality handles and locks that have the highest security standards.

You can select from a variety of uPVC handles. They include lever/lever, pad handles, offset and snib. Lever/lever handles are very popular with homeowners and comprise of two movable inline handles. Pad uPVC handle are smaller and come with an offset design. This allows you to secure the outside of your home following entry.

A uPVC offset handle is comprised of two pads one fixed and the other moveable. This kind handle is typically used on sliding patio doors. Snib handles are similar to offset handles, however they can also be utilized on uPVC French doors.

When you are choosing a replacement uPVC door handle, you must consider the style of your current doors and windows. The handle will need to match your doors' existing ones in terms of colour and style. Certain handles are available with a variety of finishes that include black and white, while others are available with more fashionable options such as chrome or gold.

When you're taking measurements, it's vital to be sure to get the screw-to-screw dimensions right. The PZ measurement refers to the distance between the centre of spindle hole as well as the centre keyhole. The screw-to-screw dimension is the distance between the screw hole on your current handle and the nearest screw on the door frame, and it is crucial to measure this accurately to identify an appropriate replacement.

Measurement & Fitting

The uPVC handle is equipped with two levers - one on each side of the lock mechanism that make it easy to operate from both inside and outside. Providing a comfortable grip and strain-free functionality, the handles are also an essential part of a door's security mechanism. With the proper uPVC handles, you can ensure that your door is safe and look stunning at the same.

Selecting the right uPVC handle can be challenging and confusing since there are many different sizes, shapes and styles on offer. When you are choosing a replacement handle for your uPVC door, it is important to take into account three key dimensions. These are the backplate fixing centres as well as the key hole and lever dimensions, and the spindle's diameter. Incorporating these elements will ensure that your new handle will be perfectly fitted to your uPVC doors and gives you a perfect fit.

Measuring these points is relatively straightforward, but you should be as precise as you can. You could end with a handle that isn't properly fitted and could cause issues when opening your uPVC doors. The most important measurement is the top screw on the backplate fixing centre, often known as the PZ size. This is measured from the pivot point of the keyhole or handle lever to the center of the screw. It is typically 92mm, but it can vary.

You should also check that your uPVC handles are equipped with the correct number of keyspindles to operate your multi-point locking system. Ideally, they should be in line with the number of keys that you use to lock and unlock your uPVC doors. Some older doors have only one spindle for the lock. More modern doors have two spindles, which allow independent operation both inside and outside.

You don't want a sliding uPVC handle, as this can put a lot of strain on the locking mechanism. This could lead to broken parts. To avoid this, look for an assortment of uPVC door handles that have built-in spring cassettes. These aren't just aesthetically pleasing but they remove some of the operating pressure on your door locking mechanism and can prolong its life span.

Broken Spring Cassettes

If a door handle becomes stiff, it is usually caused by a problem within the tubular latch itself. It's usually a simple fix that can be accomplished by repositioning the handle's fixing plates that are inside it. Open the door and make sure there aren't any obvious obstructions, such as loose screws, or signs that internal parts are protruding through the latch plate. If this isn't the situation, it's likely to be one of the spring cassettes within your uPVC handle which may need to be moved.

A door handle repair kit is the easiest way to accomplish this. It will contain all the tools you require to remove the handles and then move their cassettes. Follow the directions and you'll soon have a a sagging / drooping uPVC handle that is fully operable.

A floppy uPVC handle can be caused by thermal contraction, however, it is more likely to mean that the gearbox has broken. This isn't an issue that you can fix at home. You will need the help of locksmith.

If you have to replace the gearbox on your uPVC door, it is essential that you purchase an authentic replacement to ensure that everything is fitted properly. If you use a less expensive aftermarket part, it could cause issues such as a defective multipoint lock, and less security for your home.

You could also replace the entire uPVC lock and handle mechanism. This will not only fix the issue of sagging, but will also ensure that your door handle is operational and secure. It's important to note though that this isn't an easy or inexpensive solution. It will require the removal of your existing uPVC handle and replacement with a brand new handle. It's also worth mentioning that this option is only suitable for those with a sprung handled double glazing door since the door handle repair plate will have to be re-drilled. For a more cost-effective and quicker alternative, you can buy a new set of handles that are fitted with springs that will eliminate the need to drill doors.

Can I install a uPVC Door Handle on an aluminum or timber door?

When it comes to selecting doors for your home, there are numerous factors to consider. uPVC doors offer durability as well as security and energy efficiency whilst aluminum doors are modern and pleasing to the eye. When it comes to the design of the door you want to fit the correct handle is essential. If you are looking to replace your existing handles or add new ones, it is essential to choose the appropriate one for your property. Our uPVC door handle replacement guide will assist you in making the right choice and install them with confidence.

Changing the handle on a uPVC door handle is simple and requires only a few tools. You'll first need to remove the existing handle. This can be accomplished by unscrewing the screws that keep it in place with the screwdriver. Once the screws are removed, it is possible to pull the handle away from the door.

Next, you will need to measure the dimensions of the door handle. To accomplish this, you'll be required to determine the centre of the back plate fixing holes. This is commonly referred to as PZ measurement, and determines the handle spindle size. Once you have this information, you'll be able to buy an alternative door handle that is the correct size.

There are several different types of uPVC door handle available to meet your specific needs. Some of them are designed to offer additional security features, such as anti-drill, cylinder guards and mole grips. These uPVC handle designs can be fitted to uPVC, aluminium and wooden doors and are ideal for those looking for increased security for their home.

If you are looking for a traditional uPVC handle There are other options that will suit your needs. They are available in various finishes like black, chrome and gold. They are typically a little more expensive than standard handles however they will provide an attractive finish to your door.

After you have selected the appropriate uPVC door handle, it is essential that you check the dimensions prior to placing an order. You will need to take the measurements listed above including the lever and key hole dimension, and backplate fixing centres to make sure that the new handle is a suitable match for your door.